Commercially available mouthguards: Unearthing trace elements for the first time.

The use of mouthguards is advocated by the American Dental Association for orofacial injury prevention and teeth protection. However, the chemical environment in the mouth may cause harmful substances within the mouthguard's polymer material to leach out and be absorbed by the user. Considering this, the present study for the first time analyzed commercially available mouthguards and disclosed the presence of trace elements. Specifically, an analytical method was developed based on closed-vessel microwave-assisted digestion and plasma-based atomic spectrometry for determining toxic trace elements in mouthguard samples. Initially, 75 elements were assessed and, thereafter, quantified cadmium (Cd), copper (Cu) and lead (Pb) in each sample by inductively coupled plasma mass spectrometry (ICP-MS). Method validation was carried out by analyzing a certified reference material of Low-Density Polyethylene, and by addition and recovery experiments. Results for copper were further validated by ICP optical emission spectrometry (ICP-OES). While most samples exhibited elemental levels beneath the method's limit of quantification, Cd, Cu and Pb were detected in four samples. Remarkably, one sample had Cu levels exceeding safe limits by 109 times, highlighting potential toxicity risks. This initial research underscores the need for stricter contamination control in mouthguard materials to minimize potentially health hazards.

Mouthguard-Type Wearable Sensor for Monitoring Salivary Turbidity to Assess Oral Hygiene.

Salivary turbidity is a promising indicator for evaluating oral hygiene. This study proposed a wearable mouthguard-type sensor for continuous and unconstrained measurement of salivary turbidity. The sensor evaluated turbidity by measuring the light transmittance of saliva with an LED and a phototransistor sealed inside a double-layered mouthguard. The sensor was also embedded with a Bluetooth wireless module, enabling the wireless measurement of turbidity. The mouthguard materials (polyethylene terephthalate-glycol and ethylene-vinyl acetate) and the wavelength of the LED (405 nm) were experimentally determined to achieve high sensitivity in salivary turbidity measurement. The turbidity quantification characteristic of the proposed sensor was evaluated using a turbidity standard solution, and the sensor was capable of turbidity quantification over a wide dynamic range of 1-4000 FTU (formazine turbidity unit), including reported salivary turbidity (400-800 FTU). In vitro turbidity measurement using a saliva sample showed 553 FTU, which is equivalent to the same sample measured with a spectrophotometer (576 FTU). Moreover, in vivo experiments also showed results equivalent to that measured with a spectrophotometer, and wireless measurement of salivary turbidity was realized using the mouthguard-type sensor. Based on these results, the proposed mouthguard-type sensor has promising potential for the unconstrained continuous evaluation of oral hygiene.

A Shear-Stiffening Mouthguard with Excellent Shock Absorption Capability and Remoldability via a Dynamic Dual Network.

Mouthguards are used to reduce injuries and the probability of them to orofacial tissues when impacted during sports. However, the usage of a mouthguard is low due to the discomfort caused by the thickness of the mouthguard. Herein, we have constructed a dynamic dual network to fabricate a shear-stiffening mouthguard with remoldability, which are called remoldable shear-stiffening mouthguards (RSSMs). Based on diboron/oxygen dative bonds, RSSMs show a shear-stiffening effect and excellent shock absorption ability, which can absorb more than 90% of the energy of a blank. Even reducing the thickness to half, RSSMs can reduce approximately 25% of the transmitted force and elongate by about 1.6-fold the buffer time compared to commercial mouthguard materials (Erkoflex and Erkoloc-pro). What is more, owing to the dynamic dual network, RSSMs show good remolding performance with unchanged shear-stiffening behavior and impact resistance, which conforms to the existing vacuum thermoforming mode. In addition, RSSMs exhibit stability in artificial saliva and biocompatibility. In conclusion, this work will broaden the range of mouthguard materials and offer a platform to apply shear-stiffening materials to biomedical applications and soft safeguarding devices.

Choosing Optimal Cutoff Frequencies for Filtering Linear Acceleration and Angular Velocity Signals Associated with Head Impacts Measured by Instrumented Mouthguards.

Head impact sensors worn in the mouth are popular because they couple directly to the teeth and provide six-degree-of-freedom head measurements. Mouthpiece signal filters have conventionally used cutoff frequencies lower than recommended practices (Society of Automotive Engineers, SAE J211-1) to eliminate extraneous noise when measuring with live subjects. However, there is little information about the effects of filter choice on the accuracy of signals measured by instrumented mouthpieces. Lack of standardization in head impact measurement device post-processing techniques can result in data that are not comparable across studies or device brands. This study sought optimal filter cutoff frequencies for six-degree-of-freedom measurements made at the teeth using instrumented mouthguards. We collected linear acceleration and angular velocity signals at the head center of gravity (CG) using laboratory-grade instrumentation. We also collected and filtered similar six-degree-of-freedom measurements from an instrumented mouthguard using 24 cutoff frequencies, from 25 to 600 Hz. We transformed the measurements to linear acceleration at the center of gravity of the head (CG) using all kinematic variables at the teeth, optimizing linear and angular mouthguard cutoff frequencies with one equation. We calculated the percent error in transformed peak resultant linear acceleration and minimized the mean and standard deviation in error. The optimal cutoff frequencies were 175 Hz for linear acceleration and 250 Hz for angular velocity. Rigid impacts (3-5 ms duration) had higher optimal cutoff frequencies (175 Hz linear acceleration, 275 Hz angular velocity) than padded impacts (10-12 ms duration; 100 Hz linear acceleration, 175 Hz angular velocity), and all impacts together (3-12 ms duration; 175 Hz linear acceleration, 250 Hz angular velocity). Instrumented mouthpiece manufacturers and researchers using these devices should consider these optimal filter cutoff frequencies to minimize measurement error. Sport-specific filter criteria for teeth-based sensors may be warranted to account for the difference in optimal cutoff frequency combination by impact duration.

The International Association of Dental Traumatology (IADT) and the Academy for Sports Dentistry (ASD) guidelines for prevention of traumatic dental injuries: Part 3: Mouthguards for the prevention of dental and oral trauma.

The Guidelines for Prevention of Traumatic Dental Injuries were reviewed and approved by the Board of Directors of the International Association of Dental Traumatology (IADT) and the Academy for Sports Dentistry (ASD).

Comfort and wearability properties of custom-made and boil-and-bite mouthguards among basketball players: A randomized parallel arm clinical trial.

BACKGROUND/AIM: Thermoplastic mouthguards have been a reliable means of protection against impacts and shocks for a century. Although orofacial injuries are prevalent among basketball players, many athletes still avoid using mouthguards due to concerns regarding impaired breathing, speech interference, and nausea. This study aims to compare basketball players' subjective assessments of two different thicknesses of custom-made mouthguards (MGs) with boil-and-bite MGs (B&B MG). MATERIAL AND METHODS: A total of 60 systematically healthy male professional basketball players, without active orthodontic treatment, were enrolled and randomly assigned to three groups: Group 1 (received B&B MGs; n = 20), Group 2 (received custom-made MGs with a 3 mm thickness [ethyl vinyl asetat]; n = 20), and Group 3 (received custom-made MGs with a 5 mm thickness; n = 20). To evaluate MG comfort and usability, 12 key factors, including comfort, fit, stability, tiredness, thirsting, oral dryness, nausea, speaking, breathing, drinking, ease of wear and removal, and inclination to chew, were assessed. The athletes were made to rate these factors using a 10 cm-long Visual Analog Scale, measured at three-time intervals, and the values for both inter-group and intra-group were compared. RESULTS: Data from 48 basketball players were retrieved, and data analysis revealed that B&B MGs had the least favorable parameter values. Among the B&B MG group, stability was reported to be poorer during the initial measurement (p < .05). In the second measurement, B&B MGs showed significantly lower values for comfort, stability, tiredness, speaking, and inclination to chew (p < .05). During the third measurement, the B&B MG group exhibited significantly reduced values for comfort, breathing, drinking, and speaking (p < .05). In contrast, no statistically significant difference was observed between 3 and 5 mm thickness MGs in these measurements. CONCLUSIONS: Custom-made MGs with different thicknesses consistently outperformed B&B MGs in all measurements, indicating the potential to tailor MG thickness based on sport, age, professional level of athlete, and presence of other protective equipment. While custom-made mouthguards are considered the gold standard, dentists who provide B&B MGs can lead to cost savings while maintaining protection and encouraging athletes to use higher-quality custom-made mouthguards.

Assessing potential human health and ecological implications of PFAS from leave-in dental products.

Contaminated water and food are the main sources of documented per- and polyfluoroalkyl substances (PFAS) exposure in humans. However, other sources may contribute to the overall PFAS intake. While several studies documented the presence of PFAS in consumer products, PFAS evaluation in dental products has been limited to floss and tape to date. This study estimated PFAS exposures from a convenience sample of leave-in dental products (night guards and whitening trays), which remain in contact with the mouth for longer durations than previously evaluated dental products. This analysis evaluated whether consumer usage of these dental products meaningfully contributes to oral exposure of PFAS. Leaching of PFAS upon disposal of products was also considered. Out of 24 PFAS measured, perfluorobutanoic acid (PFBA; 3.24-4.17 ng/product or 0.67-0.83 ng/g) and perfluorooctanesulfonic acid (PFOS; 7.25-16.45 ng/product or 1.2-2.3 ng/g) were detected in night guards, and no PFAS were detected in whitening trays. Non-targeted analysis showed additional possible PFAS, which could not be characterized. The findings showed that PFOS and/or PFBA present in night guards were unlikely to pose a health concern. From an ecological perspective, the dental products examined were shown to constitute a negligible contribution to environmental PFAS. In conclusion, the examined dental products do not represent a significant source of exposure to PFAS for humans or the environment. The study demonstrates how risk assessment can be integrated by the industry into product stewardship programs to evaluate the potential health and environmental impacts of chemicals in consumer products.

Faculty of sports science students, physical education teachers, and athletes' level of knowledge and attitude about mouthguards.

OBJECTIVES: Traumatic dental injury occurs during sports competitions, training, and practice and can be prevented by the use of mouthguards. For this reason, this study aimed to evaluate the knowledge and attitudes of sports science faculty students, physical education teachers, and athletes about mouthguards. METHODS: Five hundred thirty-two participants were reached via social media. In the questionnaire consisting of 20 questions, questions about the sociodemographic characteristics of the participants were asked in part 1, and questions about their level of knowledge and attitudes about the mouthguards were asked in part 2. Descriptive statistical analysis and a chi-square test were used to evaluate the data. RESULTS: The number of people who think that mouthguards protect the athlete from traumatic dental injury is 381 (71.6%). The number of people who think that mouthguards affect the performance of the athlete is positively 228 (42.9%). To protect against traumatic dental injury, 51.48% of the participants preferred the custom-made; 39.3% of them preferred the boil-bite; 33.22% of them preferred the standard/stock type mouth guard; and 22.96% of them preferred the helmet, and 18.26% of them preferred the face mask. CONCLUSIONS: The knowledge and attitude of sports science faculty students, physical education teachers, and athletes are low about mouthguards. Since these people who are engaged in sports have a high exposure to traumatic dental injuries, education should be given to increase their awareness about mouthguards.

On-field instrumented mouthguard coupling.

Instrumented mouthguard (iMG) sensors have been developed to measure sports head acceleration events (HAE) in brain injury research. Laboratory validation studies show that effective coupling of iMGs with the human skull is crucial for accurate head kinematics measurements. However, iMG-skull coupling has not been investigated in on-field sports settings. The objective of this study was to assess on-field iMG coupling using infrared proximity sensing and to investigate coupling effects on kinematics signal characteristics. Forty-two university-level men's ice hockey (n = 21) and women's rugby (n = 21) athletes participated in the study, wearing iMGs during 6-7 month in-season periods. Proximity data classified video-verified HAE recordings into four main iMG coupling categories: coupled (on-teeth), decoupling (on-teeth to off-teeth), recoupling (off-teeth to on-teeth) and decoupled (off-teeth). Poorly-coupled HAEs showed significantly higher peak angular acceleration amplitudes and greater signal power in medium-high frequency bands compared with well-coupled HAEs, indicating potential iMG movements independent of the skull. Further, even video-verified true positives included poorly-coupled HAEs, and iMG coupling patterns varied between the men's hockey and women's rugby teams. Our findings show the potential of using proximity sensing in iMGs to identify poorly-coupled HAEs. Utilizing this data screening process in conjunction with video review may mitigate a key source of sensor noise and enhance the overall quality of on-field sports HAE datasets.

Capturing Head Impacts in Boxing: A Video-Based Comparison of Three Wearable Sensors.

Wearable sensors are used to quantify head impacts in athletes, but recent work has shown that the number of events recorded may not be accurate. This study aimed to compare the number of head acceleration events recorded by three wearable sensors during boxing and assess how impact type and location affect the triggering of acceleration events. Seven boxers were equipped with an instrumented mouthguard, a skin patch, and a headgear patch. Contacts to participants' heads were identified via three video cameras over 115 sparring rounds. The resulting 5168 video-identified events were used as reference to quantify the sensitivity, specificity, and positive predictive value (PPV) of the sensors. The mouthguard, skin patch, and headgear patch recorded 695, 1579, and 1690 events, respectively, yielding sensitivities of 35%, 86%, and 78%, respectively, and specificities of 90%, 76%, and 75%, respectively. The mouthguard, skin patch, and headgear patch yielded 693, 1571, and 1681 true-positive events, respectively, leading to PPVs for head impacts over 96%. All three sensors were more likely to be triggered by punches landing near the sensor and cleanly on the head, although the mouthguard's sensitivity to impact location varied less than the patches. While the use of head impact sensors for assessing injury risks remains uncertain, this study provides valuable insights into the capabilities and limitations of these sensors in capturing video-verified head impact events.

The effect of the simulated aging by thermocycling on the elastic modulus of ethylene-vinyl acetate brands and stress/strain development during an impact: An in vitro and 3D-FEA analysis.

BACKGROUND/AIM: Mouthguards are used to prevent dental trauma and orofacial injuries. The aim of this study was to evaluate the influence of ethylene-vinyl acetate (EVA) aging by thermocycling on elastic modulus, stress, strain and shock absorption ability of different ethylene-vinyl acetate brands used for mouthguards. METHODS: Thirty EVA samples with a dimension of 70 × 10 × 3 mm were obtained from four commercial brands (Bioart®, Erkodent®, Polyshok® and Proform®). Fifteen samples were submitted to 10,000 cycles (5°C-55°C) in a thermocycling machine with an immersion time of 30 s and a transfer time of 5 s. The samples were submitted to a uniaxial tensile test in a universal testing machine to calculate the elastic modulus. Data were statistically evaluated by two-way ANOVA and Holm-Sidak test. A three-dimensional model of the anterior maxilla was created using Rhinoceros 5.0. A 3 mm custom-fitted mouthguard was simulated. The three-dimensional volumetric mesh was generated using the Patran software (MSC Software) with isoparametrics, 4-noded tetrahedral elements and exported to Marc/Mentat (MSC Software) as element number 134. A non-linear dynamic impact analysis was performed in which a rigid object struck the central incisor at a speed of 5 m/s. The stresses were evaluated by the modified von Mises criteria and the strains were also recorded. RESULTS: Statistically significant differences were observed for elastic modulus values (p < .001). Mean and standard deviation values (MPa) without thermocycling were: Bioart (34.5 ± 0.9), Erkodent (15.0 ± 0.4), Polyshok (17.3 ± 0.4), Proform: (20.6 ± 0.8); and with thermocycling: Bioart (25.4 ± 0.8), Erkodent (10.7 ± 0.5), Polyshok (13.3 ± 0.6), Proform (13.1 ± 0.6). The thermocycling process reduced stress and strain levels regardless of the mouthguard materials. Shock absorption ability calculated based on the strain values was increased with thermocycling process. CONCLUSION: The thermocycling process, regardless of the commercial brand, reduced the stress/strain and increased the shock absorption ability of mouthguards.

Oro-dental trauma burden and mouthguard usage among contact sports players: A call for sports dentistry initiatives in Sri Lanka.

BACKGROUND/AIM: Contact sports-related oro-dental trauma contributes to a significant proportion of sports injuries among school children. Oro-dental trauma imposes a detrimental impact on the oral health-related quality of life. However, the burden of oro-dental trauma among contact sports players and their practices of mouthguards remains a research gap in Sri Lanka. The current study bridges that while providing evidence for contextual changes such as initiating sports dentistry. MATERIALS AND METHODS: The study was conducted among 1340 adolescent contact sports players in Colombo district, Sri Lanka; 63.1% males and 36.9% females (age 13-18), who were enrolled in football, rugby, hockey, boxing, basketball, and martial arts in the school setting. A checklist was administered to obtain demographic information, sports practices, and the use of mouthguards. An oral examination was conducted for those who experienced oro-dental trauma during the last 12 months. RESULTS: Self-reported oro-dental trauma pooled prevalence of the contact sports players was 35.9% (95% CI = 33.3-38.5), with males' preponderance. Dental trauma was present in 23.8% (n = 319), while 15.8% were uncomplicated and 8% were complicated. Soft tissue injuries were present in 12.1% (n = 162). Oro dental trauma (ODT) was highly prevalent among boxing, rugby, and hockey players. Only 20.8% (n = 279) of players used mouthguards. However, 91.0% (n = 254) of them were using ready-made mouthguards. Mouthguard use and the type of mouthguard showed statistically significant associations across the type of oro-dental trauma among contact sports players. CONCLUSIONS: Contact sports-related oro-dental trauma prevalence is as high as 35.9% among Colombo district school children in Sri Lanka. However, their level of mouthguard usage is shallow at 20.8%. Further research is necessary to investigate the reasons behind this, and national guidelines should be developed to prevent and manage sports-related accidental injuries.

The use of mouthguards and related factors among basketball players in Indonesia.

BACKGROUND: Basketball is a sport with a higher injury rate. Regardless, few basketball players use mouthguards, which predisposes them to injuries. The use of mouthguards (UoM) could be related to several factors. This study aims to identify factors associated with UoM and to construct a model from the factors among basketball players in Indonesia. METHODS: Through convenience sampling, a total of 286 among basketball players in Indonesia was included in this cross-sectional study. These participants filled out online a modified questionnaires regarding demographic and several factors related to UoM. The data was analyzed using chi-square test, independent-sample t-test, binary logistic regression, and structural equation modeling (SEM). RESULTS: There were 286 players. 127 of them were males and 159 were females. Of them, 86 (30.1%) used mouthguards. Age, duration (in year), and weekly practicing basketball (in hour) were all significantly different between mouthguards users and non-users with (p = 0.005, p = 0.036 and p = 0.035), respectively. The UoM was significantly associated with level of awareness, injury experience, social support, and oral health professional (OHP) support with (p = 0.002, p < 0.001, p < 0.001 and p < 0.001), respectively. This result was also supported by a variety of variables' ORs, which range from 1.28 to 5.97. The coefficient of determination (R2) was 0.27. CONCLUSIONS: The UoM among basketball players in Indonesia was related to several factors, including the level of knowledge, level of awareness, duration of basketball career, injury experiences, social support, and oral health professionals' support which was constructed to propose a model. The model could explain 27% of the relationship between variables and UoM among Indonesian basketball players. This model will be useful for more comprehensive initiatives to promote oral health. It might be applicable for other countries as well as other sports communities / physical activities.

Mouthguards Based on the Shear-Stiffening Effect: Excellent Shock Absorption Ability with Softness Perception.

Mouthguards are used to prevent craniomaxillofacial injuries when collisions happen during contact and high-speed sports. However, poor compliance with mouthguard wear in athletes is attributed to discomfort because of its thickness and hardness. These drawbacks significantly restrict their protective performance for oral tissues and applications during contact sports; as a result, the incidence of craniomaxillofacial injuries increases. In this study, non-Newton material is introduced into mouthguard material and then a mouthguard with shear-stiffening behavior is fabricated, which is named the shear-stiffening mouthguard (SSM). Compared with commercial mouthguard materials (Erkoflex and Erkoloc-pro), SSMs show remarkable enhancement of shock absorption ability with an approximately 60% reduction in peak force relative to commercial materials and approximately 3-fold extensive buffer time. Moreover, Young's modulus of SSMs (average 0.48 MPa) is extremely lower compared to commercial materials (22.88 MPa for Erkoflex and 26.71 MPa for Erkoloc-pro). This manifests that SSMs have not only excellent shock absorption ability but also softness perception. Moreover, SSMs show biocompatibility in vitro. In conclusion, this work provides a platform to develop a new type of thin and soft mouthguard with a shear-stiffening effect and broadens the horizon in protecting oral tissues with shear-stiffening materials.

Prevention of Dental trauma.

Traumatic dental injuries (TDIs) occur commonly in children and young adults with one in three adults having experience of a TDI to their permanent dentition. Although the management of TDIs have evolved vastly, the consequences of TDIs can still be profound and generally carry a high burden for the patient, family, or carer, as well as the clinician and healthcare services. Hence, prevention of TDIs where possible is key. It is important to ensure that all risk factors for dental trauma are fully explored to allow preventative advice to be tailored to each patient. General Dental Practitioners are well placed to establish a rapport with patients owing to the continuity of care that is commonly seen in dentistry, however, it is imperative that the appropriate questions are asked.This article aims to review dental trauma highlighting the significance of identification of clinical and social risk factors and prevention of TDIs. These risk factors are further divided into modifiable and non-modifiable risk factors which can guide the clinician on what further action is required and when other members of the dental or medical team should be involved. The importance of patient education in prevention of TDIs, including use of mouthguards in sport, and mouthguard design will be discussed.

Global research trends of studies related to mouthguards and dental injuries in sports activities: a bibliometric analysis.

Mouthguards (MGs) are essential devices for the protection of sports-related orofacial injuries. Mapping of the literature on this subject may help to guide future studies; therefore, this review aimed to characterize the research trends of studies related to MGs and dental injuries in sports activities through bibliometric analysis of in vivo studies concerning the frequency of MG use; knowledge, awareness, perception, and/or attitude about MGs; and adaptation (fit) of MGs in the mouth and/or prevention of traumatic dental injuries (TDIs). A literature search was performed in 6 databases for studies published up to April 2022. Text mining and analysis software was used to extract and evaluate data related to the study author, country, keywords, journal of publication, and year. Additionally, data related to the type of study, outcome, study population, age group, evaluation method, type of MG, sport classification, and sport category were extracted and analyzed. Of 6140 records identified, 222 were included in the analysis. Most of the articles came from the United States (n = 39; 17.5%) and dentistry journals (n = 145; 65.3%). The journal Dental Traumatology (n = 60; 27.0%) presented the highest number of publications. Most studies were observational (n = 195; 87.8%) and evaluated the frequency of MG use (n = 163; 44.4%). Studies were carried out in athletes (n = 181; 82.6%) and adults (n = 169; 49.1%) using questionnaires or interviews for assessment (n = 206; 84.1%). Only 89 (40.1%) studies evaluated the type of MG, mostly involving contact sports. Custom-made MGs were most commonly studied. More studies involving coaches, dentists, and child and teenaged athletes are warranted to help prevent sportsrelated TDIs in young teeth, mainly through interventional studies on the perceptions of and knowledge about MGs among these populations.

Influence of wearing mouthguards on performance among athletes: A systematic review.

OBJECTIVES: While the use of mouthguards is well established to prevent orofacial and dental trauma occurrence, limited evidence exists regarding their influence on athletic performance. The objective of this study was to conduct a systematic review of the literature to assess the effect of wearing mouthguards on athletic performance. DESIGN: Systematic review. METHODS: An extensive search was performed in the databases of PubMed/MEDLINE, Embase, Scopus and Cochrane Library for studies published up to August 2022. Only peer-reviewed studies involving humans in vivo and investigating the use of mouthguards on performance among athletes were included. Quality assessment was performed using the Cochrane Collaboration's risk of bias tool. RESULTS: The initial query yielded 4785 citations, of which 41 studies met the inclusion criteria, comprising a total of 852 athletes. Overall, wearing mouthguards was found to improve athletic performance compared to the control group (without mouthguards). Custom-made mouthguards were found to be more effective in enhancing athletic performance compared to other types of mouthguards. CONCLUSIONS: Wearing mouthguards should be advocated by athletes not only for the prevention of orofacial and dental trauma but also for their potential improvements in athletic performance in specific actions. However, caution must be exercised in interpreting these findings due to the variability in outcome measures and the lack of important methodological details.

Real-Time Continuous Monitoring of Oral Soft Tissue Pressure with a Wireless Mouthguard Device for Assessing Tongue Thrusting Habits.

In orthodontics, understanding the pressure of oral soft tissues on teeth is important to elucidate the cause and establish treatment methods. We developed a small wireless mouthguard (MG)-type device that continuously and unrestrainedly measures pressure, which had previously been unachieved, and evaluated its feasibility in human subjects. First, the optimal device components were considered. Next, the devices were compared with wired-type systems. Subsequently, the devices were fabricated for human testing to measure tongue pressure during swallowing. The highest sensitivity (51-510 g/cm2) with minimum error (CV < 5%) was obtained using an MG device with polyethylene terephthalate glycol and ethylene vinyl acetate for the lower and upper layers, respectively, and with a 4 mm PMMA plate. A high correlation coefficient (0.969) was observed between the wired and wireless devices. In the measurements of tongue pressure on teeth during swallowing, 132.14 ± 21.37 g/cm2 for normal and 201.17 ± 38.12 g/cm2 for simulated tongue thrust were found to be significantly different using a t-test (n = 50, p = 6.2 × 10-19), which is consistent with the results of a previous study. This device can contribute to assessing tongue thrusting habits. In the future, this device is expected to measure changes in the pressure exerted on teeth during daily life.

Knowledge of traumatic dental injuries and mouthguard behavior among Croatian soccer players.

OBJECTIVES/AIM: Sports-related dental injuries occur frequently among athletes due to inadequate knowledge and prevention measures. The aim of the study was to assess knowledge, attitudes, and practices of active soccer players from all leagues in Croatia regarding traumatic dental injuries and the use of mouthguards. MATERIAL AND METHODS: 393 respondents completed a questionnaire-based online survey from March 2022 to April 2022. The questionnaire consisted of 37 questions divided in four sections: demographic characteristics, experience with orofacial injuries, knowledge of emergency therapeutic procedures for dental injuries, and behaviors related to the use of a mouthguard. RESULTS: Insufficient knowledge was confirmed by a total score of 2.8 ± 2.8 points, with a possible maximum of 11. Respondents' better knowledge can be associated with educational level (p = .002), playing position (p = .046), and personally experienced injuries to the face and jaw (p ≤ .001) and teeth (p = .022). Less than 40% of respondents suffered facial and jaw injuries while playing football and 18.6% suffered dental injuries. Although most respondents (93.9%) were familiar with mouthguards and 68.9% believed that they help prevent injuries while playing football, only 16% used them. CONCLUSION: The study revealed significant gaps in knowledge regarding dental injuries and the practice of mouthguard usage among Croatian soccer players. Therefore, it is evident that additional education is needed to prevent dental injuries and take proper procedures when taking care of them among the examined population.